Recessed Downlights with adjustable Par Lamps      Back to List of Products



 
   Model 84291
Ceiling Rim : Die cast aluminium in white powder coating (RAL9002). Other colours (optional) on special request.
Reflector : Aluminium Anodized (A) in silver finish
Light Shield : Aluminium drum in black matt finish to prevent light spillage
Lampholder : E27 porcelain – VDE or ENEC approved.
Lamp : QPar 20 50W
Beam Angle : 10°/ 30°
Voltage : 230 Volts 50Hz
Heat Sink : Die cast aluminium for heat dissipation
Adjustable : 0°-30° tilt with locking mechanism and 359° rotation.
Cable : 3 core cable - 600mm length - VDE or ENEC approved or other equivalents
Insulation Class : Class 1
Protection : IP 20

84291-A
Quick guide for no. of luminaires
Area : 10m x 10m
Ceiling Height : 3m
Working Plane : 0.8m
Reflectance : 70/50/30%
  (Ceiling/ Wall / Floor)
30° Beam Angle
100 LUX
200 LUX
300 LUX
35
72
99
   
TOP
back to top
   Model 95552.000
Ceiling Rim : Die cast aluminium in white powder coating (RAL9002). Other colours (optional) on special request.
Reflector : Aluminium anodized in high specular silver finish
Light Shield : Aluminium drum in black matt finish to prevent light spillage
Lampholder : E27 porcelain – VDE or ENEC approved.
Lamp : QPar 30 100W
Beam Angle : 10°/ 30°
Mains Voltage : 230 Volts 50Hz
Heat Sink : Die cast aluminium for heat dissipation with terminal block
Adjustable : 0°-30° tilt with locking mechanism and 359° rotation
Cable : 3 core cable - 500mm length - VDE or ENEC approved or other equivalents
Insulation Class : Class 1
Protection : IP 20

95552.000

 

 

 

 

 

 
Quick guide for no. of luminaires
Area : 10m x 10m
Ceiling Height : 3m
Working Plane : 0.8m
Reflectance : 70/50/30%
  (Ceiling/ Wall / Floor)
30° Beam Angle
100 LUX
200 LUX
300 LUX
12
24
35
   
TOP
back to top
   Model 86191
Ceiling Rim : Die cast aluminium in white powder coating (RAL9002). Other colours (optional) on special request.
Reflector : Aluminium anodized (A) in silver finish
Light Shield : Aluminium drum in black matt finish to prevent light spillage
Lampholder : E27 porcelain – VDE or ENEC approved.
Lamp : QPar 38 100W
Beam Angle : Spot/ Flood
Voltage : 230 Volts 50Hz
Heat Sink : Die cast aluminium for heat dissipation
Adjustable : 0°-30° tilt with locking mechanism and 359° rotation
Cable : 3 core cable - 600mm length - VDE or ENEC approved or other equivalents
Insulation Class : Class 1
Protection : IP 20

86191-A
Quick guide for no. of luminaires
Area : 10m x 10m
Ceiling Height : 3m
Working Plane : 0.8m
Reflectance : 70/50/30%
  (Ceiling/ Wall / Floor)
Flood
200 LUX
300 LUX
500 LUX
25
42
63
   
TOP
back to top
   Model 88161
Ceiling Rim : Die cast aluminium in white powder coating (RAL9002). Other colours (optional) on special request.
Reflector : Aluminium anodized (A) in silver finish
Light Shield : Aluminium drum in black matt finish to prevent light spillage
Lampholder : GX 16d – VDE or ENEC approved.
Lamp : QPar 56 500W
Beam Angle : Near Spot/ Medium Flood/ Flood
Voltage : 120 Volts. Transformer to be ordered separately
Heat Sink : Die cast aluminium for heat dissipation
Adjustable : 0°-30° tilt with locking mechanism and 359° rotation
Cable : 3 core cable - 600mm length - VDE or ENEC approved or other equivalents
Insulation Class : Class 1
Protection : IP 20
Model 85241

88161-A
Quick guide for no. of luminaires
Area : 10m x 10m
Ceiling Height : 6m
Working Plane : 0.8m
Reflectance : 70/50/30%
  (Ceiling/ Wall / Floor)
Flood
200 LUX
500 LUX
750 LUX
4
9
15
TOP
back to top


MENU
HOME
INTRODUCTION
PROFILE
PRODUCTS
ENQUIRY
CONTACT
Designed by WebWork-Solutions @ Copyrights